Wednesday, October 30, 2019

Batch Distillation Column Assignment Example | Topics and Well Written Essays - 500 words

Batch Distillation Column - Assignment Example A single batch column is able to separate a multi-component mixture in a single operation, to its various components. During the start-up period, the column is adjusted in a way that ensures the distillate produced will be of desired purity (Jana, 2008, 145). The production period is, in contrast, the part of the process during which the product is withdrawn from the column. Operation of the batch distillation column takes place in four ways. Constant reflux ratio, total reflux, optimal ratio, and constant distillate composition are the methods used in operating batch distillation column. The method of operation of the batch distillation column is dependent on the type of mixture that is being separated. In the separation of the methanol/water mixture for instance, total reflux method could be appropriately used. In total reflux, the batch process is left alone to approach steady state before the withdrawal of the distillate product is allowed to start. In order to now achieve steady state, overhead vapours are condensed and collected in the condenser-reflux drum system (Diwekar, 2011, 5). All the liquid that has been condensed is directed to return to the column. When this happens, the liquid is further taken through the distillation process several times until there is no more distillate product to be removed. This continuous process of reflux and subsequent distillation ensures that the maximum possible purity is obtained, since no more distillate product is left unremoved. The process that goes on in the batch distillation column is a complex one. Liquid mixture is put in a vessel that is known as the still spot. The vessel is then heated to such a time as vapour is produced, and the vapour is directed to a rectifying column. As the vapours rise in the column, they become enriched in the component of the mixture that is more volatile. In the initial start-up period, all the vapour collected from the top section of the column is

Monday, October 28, 2019

Transformational Learning Essay Example for Free

Transformational Learning Essay I believe that transformational learning process when everyone in the world goes through it in their life. When that time in your life comes up if you are on the right path or no sometimes you are on the right career path or not some adult change their career path that’s is using their transformational learning. A transformational learning experience from my life is when my mother told me and my sibling that we was moving to myrtle beach south Carolina it took us nine hundred thirty eight miles away from our family. I was so heart broken when my mother told me that the process of us moving was overwhelming and so painful, my mother didn’t know how to tell our family that we was moving so far away. This moving process was so stressful for me and my siblings, but also exciting that we was moving to a new state and not knowing anyone or how to get around to places without getting are self lost. My mother knew our family members would be so sad because we Was moving so far away. My mother had to make sure the moving process went well before we moved to Myrtle Beach. One of the Mezirow’s seven phases that applies to my experiences would be recognizing that others have gone through a similar process. I researched that everyday people move to better their self and to better their kids in their education or better their career. My mother move to Myrtle Beach South Carolina so that me and my sibling can further are career and are goals.

Saturday, October 26, 2019

Symbols and Symbolism - Pearl as Living Symbol in The Scarlet Letter :: Scarlet Letter essays

Pearl as Living Symbol in The Scarlet Letter      Ã‚  Ã‚   Pearl.   A child born of sin.   Conceived by lust.   Created by impurity.      Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   As the result of her parents fall from grace, she represents the sinfulness of their act, and is a continual tool for the recollection of their dubious deed.   Sent, was she, from the Almighty God as a gift, and a burden of the heart.      Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   "'God gave me the child?' cried she.   'He gave her in requital of all things else, which ye had taken from me.   She is my happiness!- she is my torture, none the less!   See ye not, she is the scarlet letter, only capable of being loved, and so endowed with a million fold the power of retribution for my sin?   Ye shall not take her!   I will die first!'"(109)      Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   "'There is truth in what she says,' began the minister, with a voice sweet, tremulous, but powerful, insomuch that the hall reechoed, and the hollow armor rang with it - 'truth in what Hester says, and in the feeling which inspires her!'"(110)...      Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   "'I must be even so,' resumed the minister.'" " 'This child of its father's guilt and its mother's shame hath come from the hand of God, to work in many ways upon her heart, who pleads so earnestly, and with such bitterness of spirit, the right to keep her.   It was meant, doubtless, as the mother herself hath told us, for a retribution too; a torture to be felt at many an unthought-of moment; a pang, a sting, an ever-recurring agony, in the midst of a troubled joy!   Hath she not expressed this thought with the garb of the poor child, so forcibly reminding us of that red symbol which sears her bosom?'"(110-111).      Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Pearls gestures, and the essence which her presence pours forth, insinuate to the child's evil roots and the effect there of.      Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   "the child could not be made amenable to rules.   In giving her existence, a great law had been broken, and the result was a being whose elements where perhaps beautiful and brilliant, but all in disorder."... "Above all, the warfare of Hester's spirit, at that epoch, was perpetuated in Pearl.   She could recognize her wild, desperate, defiant mood, the

Thursday, October 24, 2019

Linguistic Performance and Competence Essay

Linguistic Knowledge Speakers’ linguistic knowledge permits them to form longer and longer sentences by joining sentences and phases together or adding modifiers to a noun. whether you stop at three, five or eighteen adjectives, it is impossible to limit the number you could add if desired. Very long sentences are theoretically possible, but they are highly improbable. Evidently, there is a difference between having the knowledge necessary to produce sentences of a language, and applying this knowledge. It is a difference between what you know, which your linguistic competence  is, and how you use this knowledge in actual speech production and comprehension, which is your linguistic performance. Linguistic Performance Linguistic Performance – a speaker’s actual use of language in real situations; what the speaker actually says, including grammatical errors and other non-linguistic features such as hesitations and other disfluencies. When we speak, we usually wish to convey some message. At some stage in the act of producing speech, we must organize our thoughts into strings of words. Sometimes the message is garbled. We may stammer, or  pause, or produce slips of the tongue. We may even sound like the baby, who illustrates the difference between linguistic knowledge and the way we use that knowledge in performance. Linguistic Competence Linguistic competence is a term used by speech experts and anthropologists to describe how language is defined within a community of speakers. This term applies to mastering the combination of sounds, syntax and semantics known as the grammar of a language. †¢ACCORDING TO CHOMSKY, COMPETENCE IS THE ‘IDEAL’ LANGUAGE SYSTEM THAT makes it possible for speakers to produce and understand an infinite  number of sentences in their language, and to distinguish grammatical sentences from ungrammatical sentences. oThis means a person’s ability to create and understand sentences, including sentences they have never heard before. Competence versus Performance â€Å"Linguistic theory is concerned primarily with an ideal speaker-listener, in a completely homogeneous speech-communication, who know it’s (the speech community’s) language perfectly and that it is unaffected by such grammatically irrelevant conditions as memory limitations, distractions, shifts of attention and interest, and errors (random or characteristic) in  applying his knowledge of this language in actual performance. â€Å" Chomsky differentiates competence, which is an idealized capacity, from performance being the production of actual utterances. According to him, competence is the ideal speaker-hearer’s knowledge of his or her language and it is the ‘mental reality’ which is responsible for all those aspects of language use which can be characterized as ‘linguistic’. Chomsky argues that only under an idealized situation whereby the speaker-hearer is unaffected by grammatically irrelevant conditions such as memory limitations and distractions  will performance be a direct reflection of competence. A sample of natural speech consisting of numerous false starts and other deviations will not provide such data. Therefore, he claims that a fundamental distinction has to be made between the competence and performance. Chomsky dismissed criticisms of delimiting the study of performance in favor of the study of underlying competence, as unwarranted and completely misdirected. He claims that the descriptivist limitation-in-principle to classification and organization of data, the  Ã¢â‚¬Å"extracting patterns† from a corpus of observed speech and the describing â€Å"speech habits† etc. are the core factors that precludes the development of a theory of actual performance. Chomsky thinks that what linguists should study is the ideal speaker’s competence, not his performance, which is too haphazard to be studied. Although a speaker possesses an internalized set of rules and applies them in actual use, he cannot tell exactly what these rules are. So the task of a linguist is to determine from the data of performance the underlying system of rules that has been mastered by the language user.

Wednesday, October 23, 2019

Lab Report I

Determining the Stoichiometry of Chemical Reactions Mrs. Farrales Nikita Pandya October 23, 2012 December 3, 2012 INRODUCTION In the method of continuous variations the total number of moles of reactants is kept constant for the series of measurements. Each measurement is made with a different mole ratio of reactants. A mole ratio is ratio between the amounts in moles of any two compounds involved in a chemical reaction.Mole ratios are used as conversion factors between products and reactants in many chemistry problems. The optimum ratio, which is the stoichiometric ratio in the equation, form the greatest amount of product, and, if the reaction is exothermic, generate the most heat and maximum temperature change, Double replacement reactions are generally considered to be irreversible. The formation of an insoluble precipitate provides a driving force that makes the reaction proceed in one direction only.In a double reaction, the two reactants which are aqueous solutions (which can be broken down), can form two products one also an aqueous solution, and another which can be a precipitate, water, or a gas, which cannot be broken down, therefore making the reaction irreversible. The objective/goal of this laboratory is to find the optimum mole ratio for the formation of a precipitate in a double replacement reaction and use this information to predict the chemical formula of the precipitate. How can the products of a double reaction be predicted?How will it be determined if a product is aqueous or a precipitate? How will the method of continuous variations help determine the mole ratio of the two reactants? METHODS Materials: 1. Copper (II) chloride solution, CuCl2, 0. 05 M, 210 mL 2. Iron (III) nitrate solution, Fe(NO3) 3, 0. 1 M. 110 mL 3. Sodium hydroxide solution, NaOH, 0. 1 M, 320 mL 4. Sodium phosphate, tribasic, solution, Na3PO4, 0. 05 M, 210 ml 5. (14+) Test tubes (some graduated, some without graduations) 6. Black Marker 7. Marking tape 8. (2) Stirring rods, large 9. Pipets 10. (2) Test tube racks 1. (2) Pairs of gloves 12. Lab goggles 13. Lab apron 14. Timer 15. Para film Procedure The lab was set up, as it is seen in figure 1, with seven test tubes in a test tube rack. Using a clean 10mL graduated cylinder, the appropriate volume of iron(III) nitrate solution was taken from its container and transferred/added to each test tube using a pipet. Using a another clean 10mL graduated cylinder, the appropriate volume of sodium hydroxide solution was taken from its container and transferred/added to each test tube, which already contained iron(III) nitrate, using a pipet.Before the timer was started, each of the solutions in the test tube was stirred/mixed with a large stirring rod. This ensured that both the reactants mixed properly. After stirring the solutions, observations were noted for any signs of chemical changes. The mixtures were to be left for 10 minutes (a timer was used) to sit undisturbed, because any movement of the test tube could cause a hindrance in the settlement of the precipitate. Though each test tube was left undisturbed for 10 minutes, final observations were made after the solutions were left to sit undisturbed for 24 hours.After the 24 hours of settling, the volume of the precipitate in each test tube was measured and recorded. For test tube with graduations, seeing the numbers at eye level made the calculations, but for test tubes with no graduations a different method was used to measure the volume of the precipitate. First another test tube of the same size was found, then using a pipet, 1ml of water was measured in a 10mL graduated cylinder, and then poured into the similar size test tube. Using a black marker graduations were written on the test tube. Graduations up to 5mL only were made.After the graduations were complete the â€Å"graduated† test tube was held side by side with the similar size test tube with no graduations, and the precipitate was measured using this metho d. The same procedures were repeated with the reactants of the second table, CuCl2 and Na3PO4 Figure 1: The set up of the lab, the test tubes were labeled 1-7 RESULTS Data Table 1: Ratio between Fe(NO3)3 and NaOH are presented in this table along with the amount of precipitate that was produced in each of the test tube. Test Tube | 1| 2| 3| 4| 5| 6| 7| Fe(NO3)3, 0. 1M, mL| 1| 2| 4| 3| 2| 5| 4|NaOH, 0. 1M, mL| 11| 10| 16| 9| 5| 10| 6| Fe:OH Mole Ratio| 1:11| 1:5| 1:4| 1:3| 2:5| 1:2| 2:3| Volume of Precipitate (mL)| 1 mL| 2. 8 mL| 3 mL| 0 mL| 0 mL| 0 mL| 0 mL| Data Table 2: Ratio between CuCl2 and Na3PO4 are presented in this table along with the amount of precipitate that was produced in each of the test tube. Test Tube | 1| 2| 3| 4| 5| 6| 7| CuCl2, 0. 05 M, mL| 1| 4| 4| 6| 6| 8| 5| Na3PO4, 0. 05 M, mL| 5| 8| 6| 6| 4| 4| 1| Cu:PO4 Mole Ratio| 1:5| 1:2| 2:3| 1:1| 3:2| 2:1| 5:1| Volume of Precipitate (mL)| 1 mL| 4 mL| 3. 75 mL| 4 mL| 2. 5 mL| 3. 2 mL| 1 mL|RESULTS PARAGRAPH – PO ST LAB QUESTIONS Observations: Fe(NO3)3 and NaOH 1. Start time: 12:07 Separated instantly. After 3 minutes separated halfway End time: 12:17 Precipitate is 1/5 of test tube color is light orange 24 hours later: Same results 2. Start time: 12:11 Separated a little End time: 12:21 The precipitate takes up 2/5 of the test tube & is orange 24 hours later: Same results 3. Start time: 12:15 Instant separation End time: 12:25 Liquid still a little cloudy. Precipitate is ? of test tube color is light/dark orange 24 hours later: Same results 4.Start time: 12:19 Separating VERY slowly End time: 12:29 There is no precipitate just yet. Very cloudy. 24 hours later: Same results 5. Start time: 12:22 Separation did not occur instantly End time: 12:32 There is no precipitate just yet. Very cloudy. 24 hours later: Same results 6. Start time: 12:24 Separation did not occur instantly End time: 12:34 There is no precipitate. Very Cloudy. 24 hours later: Same results 7. Start time: 12:27 Separation did not occur instantly End time: 12:37 There is no precipitate just yet. 24 hours later: Same results CuCl2 and Na3PO4 1.Start time: 12:36 Separated quickly End time: 12:46 Precipitate ? of test tube. Color is light blue 24 hours later: Same results 2. Start time: 12:37 Separated quickly End time: 12:47 Precipitate is ? of test tube. Color is regular blue 24 hours later: Same results 3. Start time: 12:39 Separated quickly End time: 12:49 Precipitate is ? of test tube. Color is regular blue. 24 hours later: Same results 4. Start time: 12:41 Separated only a little bit in the first two minutes End time: 12:51 Precipitate is ? of test tube and color is light blue 24 hours later: Same results 5.Start time: 12:42 Separated only a little bit in the first two minutes End time: 12:52 Precipitate is 2/5 of test tube and color is light blue 24 hours later: Same results 6. Start time: 12:43 Separated only a little bit in the first two minutes End time: 12:53 Precipitate is 3/5 of test tube and co lor is light blue 24 hours later: Same results 7. Start time: 12:45 Separated only a little bit in the first two minutes End time: 12:55 Precipitate is 1/5 of test tube and color is light blue In the observations mentioned above, estimates using numbers (fractions) were made.These fractions basically estimate the amount of precipitate that was formed in each test tube, or the lack of a precipitate. Observations were made after the ten-minute mark, and then left under the fume hood for 24hrs due to the fact that time fell short; observations were made then also. The observations also show that in the test tube where it was recorded that the separation between the compounds was instant, there was a precipitate formed. Respectively the observations also show that in test tubes where it was recorded that separation between the compounds was not instant, there was no precipitate formed.These observations describe the color of the solution/precipitate, and tell the transparency of the sol ution. Lastly these observations elaborate on the slow or fast process of how each solution separated into a precipitate, or didn’t, based on their specific mole ratio. It justifies how the different mole ratio produced the different precipitate amount. Figure 2: Fe(NO3)3 and NaOHFigure 3: CuCl2 and Na3PO4 These pictures show a visual of the seven test tubes in each experiment. In some of them the precipitates are present, in other test tubes there are no precipitates present, which means that they are still solutions.The test tubes with graduations, that had precipitates present were measured by reading the number at eye level. But test tube with no graduations, that had precipitates present, a special method that was mentioned in the procedures were used. Since in experiment two, all of the test tubes had a precipitate present there was a clear distinction in colors, the blue and clear, they were heterogonous mixtures. But in experiment one, only three of the seven test tub es had precipitates present, in those three test tubes there is a distinction in color, the red-ish orange and clear, they were heterogonous mixtures.But in the other four test tubes, since they are solutions it is a homogenous mixture where the entire solution has one consistency and color. DISCUSSION By conducting the experiment, and analyzing the results, the optimum mole ratio for the formation of the precipitate in a double replacement reaction was found, and the chemical formula of the precipitate was found, the initial purpose of the experiment. At the beginning of the experiment two questions were proposed. ANSWER QUESTIONS ERRORS CONCLUSION LITTLE BIT FROM DATA AND DISCUSSION PARAGRAPH.

Tuesday, October 22, 2019

Environmental Science And Human Populations Worksheet Essays

Environmental Science And Human Populations Worksheet Essays Environmental Science And Human Populations Worksheet Essay Environmental Science And Human Populations Worksheet Essay What would you include in a brief summary on the history of the modern environmental movement, from the 1 sass to the present? October 2, 1968 The Wild and Scenic Rivers Act, the National Trails System Act January 1, 1970 The National Environmental Policy Act (NEAP) April 22, 1970 The first national Earth Day February 17, 1981 President Reagan issues Executive Order; Office of Management and Budget (MOB) 20th anniversary of Earth Day 2. Explain the primary concern over exponential population growth. What promotes exponential population growth? What constrains exponential population growth? Population concern is about the balance between human needs and the resources available to meet those needs, now, and the future. Population has a constant birth rate through time and is never limited by food or disease, it as, exponential growth the birth rate alone controls how the population grows. 3. What is carrying capacity? Compare predictions for human population growth in developed countries versus developing countries. What will occur if carrying capacity is exceeded? The carrying capacity of a given ecosystem is the total number of organisms in a given species for which there are sufficient resources, so that they survive and reproduce. Developing countries have poor access to birth control, often reactive religions which prohibit birth control and value large families, and often have a lot of farmers, who benefit from having lots of children to help them work the land and take care of them in their old age. If carrying capacity exceeded warfare might occur. 4. How do individual choices affect natural ecosystem? Provide examples from your personal or community experience. Nearly every activity a person does affects the ecosystem, either positively or negatively. I live in the city, there are a lot of people, trash, buses, cars and transportation.

Monday, October 21, 2019

Proposal to analyze your current computer systems

SUBJECT: Proposal to analyze your current computer systems and the problems you are experiencing with data circulation. On January 5, 2001 I had a meeting with you to discuss the possibility of installing a full working server-based networking scheme for your company. You indicated that you do not have an existing network and that your company is growing out of the current computer scheme. You also said that you need a better way of communicating between departments. We discussed how I could help you in determining what you will need to have a working network that would meet your current financial and business needs. However, you indicated that the cost was not as important as a sound and functioning network. Upon your request I have developed a proposal to implement a plan of action to address your needs. At the current time you have 10 computers throughout your office. You also have four computers in your plant area. The 10 computers that are in your office area are broken up in to 3 divisions. The first is for sales representation. The second is for your accounting department and the third is for your Engineering team. In the plant area the computers are set up strictly for processing and other pertinent information for your daily recycling specifications. The problem that you are experiencing is that you have no way to efficiently communicate between departments. You need share information between departments without physically consulting each other in person. You also indicated to me that you have lost data from computer failures, which has lead to time constrictions, loss of sales, and organization. Your main focus is how to utilize a networking scheme that would eliminate these issues. The top priority of this project is to analyze your current problems and to develop a networking plan that would suit your financial